High Quality Horizontal Slurry Pumps, Gravel Pumps, Vertical Sump Slurry Pumps, Submersible Slurry Pumps

Basic Info

Model NO.	CH(R), CSP, ZJQ, etc
After-sales Service	Yes
Warranty	1 Year
Max.Head	118m
Max.Capacity	5400m3/H
Driving Type	Motor or Diesel Engine
Impeller Number	Single-Stage Pump
Working Pressure	High Pressure Pump
Influent Type of Impeller	Single Suction Pump
Position of Pump Shaft	Horizontal Pump
Pump Casing Combined	Horizontal Split Pumps
Mounting Height	Suction Centrifugal
Impeller	Closed
Usage	Pump, Pumps, Slurry Pump
Color	as Customer Required
Voltage	220V/380V/410V/460V/High Voltage
Frequency	50Hz/60Hz
Transport Package	Export Standard Wooden Box
Specification	High Chrome Alloy, Rubber, Polyurethane
Origin	Hebei, China
HS Code	8413810090
Production Capacity	7000 Sets/Year

Product Description

Horizontal Slurry Pumps:

The CH(R) type pump is a horizontal cantilever centrifugal slurry pump,it is suitable for conveying solid-liquid mixtures containing suspended solid particles (such as ore, ash, coal slime, silt and gravel, etc.)

It is suitable for metallurgy, mining, coal, electric power, building materials and other industries.

1. Hydraulic model: a hydraulic model designed with CFD flow simulation technology, with high hydraulic efficiency.

2. Double-layer pump casing structure: the inner layer (volute) is made of high-chromium alloy anti-wear cast iron, and the outer layer (pump body, pump cover) is ordinary gray cast iron or ductile iron.

3. The pump body and pump cover can be reused by replacing the wearing parts (volute), which saves costs.

4. Bearing body: It adopts a cylindrical structure, and the axial position of the rotor part can be easily adjusted through the thread, so that the water pump can run safely and efficiently.

5. Lubrication: The bearing adopts grease lubrication, compact structure, clean and hygienic.

6. Sealing form: Packing seal or expeller seal is adopted, and mechanical seal can also be adopted according to user requirements.

7. Discharge outlet position: It can be installed in 8 different positions at 45° intervals according to needs.

8. We can also produce CM, CHH series slurry pumps.

The pumps has wide performance range, good cavitation performance and high efficiency.

All series of products can adopt multi-stage series technology to meet long-distance transportation.

CH(R) type Slurry Pump Clean Water Performance Table:

Type	Allowable Mating Max. Power(KW)	Capacity/Q m³/H	Head/M	Speed/RPM	Max Efficiency/%	NPSH/M	Impeller Diameter/mm
1.5/1-CH	15	12.6~28.8	6~68	1200~3800	40	2~4	152
2/1.5-CH	15	32.4~72	6~58	1200~3200	45	3.5~8	184
3/2-CH	30	39.6~86.4	12~64	1300~2700	55	4~6	214
4/3-CH	30	86.4~198	9~52	1000~2200	71	4~6	245
6/4-CH	60	162~360	12~56	800~1550	65	5~8	365
8/6-CH	300	360~828	10~61	500~1140	72	2~9	510
10/8-CH	560	612~1368	11~61	400~850	71	4~10	686
12/10-CH	560	936~1980	7~68	300~800	82	6	762
14/12-CH	560	1260~2772	13~63	300~600	77	3~10	965
16/14-CH	1200	1368~3060	11~63	250~550	79	4~10	1067
20/18-CH	1200	2520~5400	13~57	200~400	85	5~10	1370

Structure:

(1) Metal lined slurry pump:

(2) Rubber lined slurry pump:

Vertical Slurry Pumps:

The CSP(R) sump pump is a vertical centrifugal slurry pump, immersed in the liquid, the pump inlet is vertically downward, and the outlet is vertically upward on the other side of the pump.

The pump is mainly composed of lower filter screen, pump body, impeller, shaft, guard plate, bracket and other parts.

The upper part of the pump is supported by a bearing; the pump is installed under the liquid without any shaft seal and shaft seal water, and it can work normally under conditions of insufficient suction.

The flow parts are made of wear-resistant materials, which are used to transport abrasive, coarse particles, and high-concentration slurry.

It is mainly suitable for conveying corrosive, coarse particles and high-concentration slag slurry. It is widely used in metallurgy, mining, coal, electric power, building materials, environmental protection and other departments.

The transmission type of this pump is BD and DC, namely belt drive and direct drive.

The depth of immersion in the liquid can be determined according to the actual needs of users within the standard size range.

Seen from the direction of the pump suction port, it rotates counterclockwise.

CSP(R) type Sump Pump Clean Water Performance Table:

Type	Allowable Mating Max. Power (Kw)	Range Of Performance				Impeller
		Capacity/Q	Head /m	Speed /rpm	Max Efficiency /%	No. of Vanes	Diameter /mm
		m³/hr
40PV-CSP	15	19.44-43.2	4.5-28.5	1000-2200	40	5	188
65QV-CSP	30	23.4-111	5-29.5	700-1500	50	5	280
100RV-CSP	75	54-289	5-35	500-1200	56	5	370
150SV-CSP	110	108-479.16	8.5-40	500-1000	52	5	450
200SV-CSP	110	189-891	6.5-37	400-850	64	5	520
250TV-CSP	200	261-1089	7.5-33.5	400-750	60	5	575
300TV-CSP	200	288-1267	6.5-33	350-700	50	5	610

Structure:
Gravel Pumps:

CG(H) type gravel pump is mainly used for continuous conveying of strong abrasive materials that are too large to be conveyed by general slurry pumps. It is suitable for dredging of dredgers, dredging of rivers, mining and transportation of blasting slag in metal smelting, etc.

The CGH type is a high-head gravel pump.

1. This series of gravel pumps are horizontal centrifugal pumps with a single pump shell structure.

Broadly speaking, it also belongs to a kind of slurry pump.

2. The pump body and pump cover are clamped by special clamps, and the outlet direction of the pump can be at any position of 360 degrees, which is easy to install and use.

3. The bearing assembly of the gravel pump adopts a cylindrical structure, which is convenient to adjust the gap between the impeller and the pump body, and can be removed as a whole during maintenance.

4. The bearings are lubricated with grease.

5. There are three types of shaft seals for gravel pumps: packing seal, expeller seal, and mechanical seal.

6. The gravel pump has a wide flow path, good cavitation performance, high efficiency and abrasion resistance.

7. The main transmission methods are: V-belt transmission, elastic coupling transmission, Gear reducer transmission, hydraulic coupling transmission, SCR speed control, etc.

8. Material of Wet parts: nickel-containing high-chromium wear-resistant alloy.

9. The use of multiple speeds and multiple variants makes the pump run under the best conditions.

10. Long service life, high operating efficiency, and can meet many types of harsh transportation conditions.

Performance parameters:

Flow range:	36-5040m3/h
Head range:	3.5-80m
Power:	60-1200kw
Maximum passing particle size:	254mm
Material:	High chrome alloy

Structure:

 

Submersible Slurry Pumps:
The ZJQ submersible slurry pump is a hydraulic machine in which the motor and the water pump are coaxially submerged into the medium.

It is suitable for conveying liquids containing solid particles such as sand, coal slag, tailings, etc. It is mainly used for the removal and transportation of slurry liquids in metallurgy, mining, thermal power plants and other enterprises. It is an ideal substitute for traditional mud pumps.

In addition to the main impeller, a set of stirring impellers are added to the bottom of the pump, which can spray the deposited sludge into turbulent flow. The pump can achieve high-concentration transportation without auxiliary devices.

The operating reliability of the unique sealing device greatly extends its service life. The electrode adopts overheat protection, and various protection devices such as near-water detection can be added according to user requirements, which can operate safely under severe working conditions.

Performance parameters:

Flow range:	15-2000m3/h
Head range:	10-95m
Power:	7.5-315kw
Maximum passing particle size:	92mm
Material:	High chrome alloy,SS304,SS316,SS316L,etc

Features:

1. The motor is protected by a mechanical seal, which can effectively prevent high-pressure water and impurities from entering the inner cavity of the motor.

2. In addition to the main impeller, there is also a stirring impeller, which can stir the sludge deposited on the bottom of the water into a turbulent flow and then extract it.

3. The main flow parts such as impeller and stirring impeller are made of high wear-resistant materials, which are wear-resistant, corrosion-resistant, non-clogging, and have strong sewage discharge capacity, and can effectively pass larger solid particles.

4. It is not limited by the suction range, the slurry suction efficiency is high, and the silt dredging is more thorough.

5. There is no need to equip auxiliary vacuum pump, so the investment is lower.

6. There is no need to be equipped with auxiliary stirring or spraying devices, making the operation easier.

7. The motor is submerged under water, no complicated ground protection and fixing devices need to be built, and the management is easier.

8. The stirring impeller directly contacts the deposition surface, and the concentration is controlled by the depth of the dive, so the concentration control is more free.

9.The equipment directly dives into the water to work, there is no noise and vibration, and the site is more tidy.

Structure:

Company:


Shijiazhuang Chongmu Fluid Machine is a modern pump company specializing in production, research and development, sales and service. We have been in the centrifugal pump industry for more than 20 years. We have a modern standard pump room and a processing workshop with a variety of advanced processing equipment. The whole process from casting to assembly is one-stop closed-loop production. The team of experienced production R&D engineers is professional and efficient. Choose us, professional team, professional equipment, trustworthy.

Chongmu Main products:

1.Slurry pumps
2.Gravel pumps
3.ZJQ submersible slurry pumps
4.Inline pumps
5.Multi-stage pumps
6.Split case pumps
7.Sewage pumps
8.Mixed flow pumps
9.Self priming pumps
10.Spare parts

Our Workshop:

 

FAQ:

1.What information do you need to offer a quotation?
Liquid:
Pump Capacity: m³/h or L/S
Pump Head: M
pH:
Specific of gravity:
Voltage: V
Frequency: Hz

2.Are you the manufacturer or trading company?
We are real manufacturer for centrifugal pumps,and we have been in this industry for more than 20 years.

3.Can we pay a visit to your factory?
Yes.We warmly welcome you to visit our factory.

4.What is the MOQ?
There is no MOQ.
1 set of pump,or 1 piece of spare part is ok.

5.Do you accept OEM orders?
Yes.Send us the drawings,then we can produce for you.